While you are researching crown rd 5220 1.35 (b) 1350kg reach truck in and around Essex check the state of the forks on any second hand forklift you look at. Bent forks may need to be replaced. The best way to check this is simply to put the mast in a vertical position and lower the forks to the floor. Once at the floor use a tape to check that both fork tips are the same height from the ground.

Tip – When you are searching for crown rd 5220 1.35 (b) 1350kg reach truck in and around Essex remember that specialist trucks are available such as 4-way lift, bend in the middle, side-lifts etc, but in general these are all more expensive and are most cost-effective when used intensively for specialist work.

While investigating crown rd 5220 1.35 (b) 1350kg reach truck in and around Essex take into account the physical restrictions of the areas in which a machine will have to operate. In particular consider any doorways through which your forklift will have to move. If your doorways are standard 1.8m (6ft) or 2.4m (8ft) high then you obviously wont be able to use a machine with a collapsed mast height of over 3m (10ft). Before making your selection make sure that all the doorways and openings that it will need to fit through have been measured.